Since October, 2006 the Grain harvester Vector has been equipped with a new header of the Power Stream series, cutting width is 5, 6, 7 and 9 m. Practice shows, that the use of such headers reduces the shatter losses and ensures constant feeding irrespective of operating conditions. The Power Stream header create the basis for top performance of the Rostselmash harvesters.
Since October, 2006 the Grain harvester Vector has been equipped with the new header of the Power Stream series, cutting width is 5, 6, 7 and 9 m. Practice shows, that the use of such headers reduces the shatter losses and ensures constant feeding irrespective of operating conditions. The Power Stream headers create the basis for top performance of the Rostselmash harvesters.
High quality cutting
The blade planetary gear of the Schumacher type operates smoothly, accurately and is wearproof. The high cutting frequency (1080 runs/min) and a double cutting edge guarantee the rapid and clean cut with minimal losses. The considerable distance between the blades and the auger (75 cm) helps to reduce losses on the header.
Smooth feeding
The real hydraulic drive allows to adjust the rotation speed steplessly, ensuring the optimal and constant mass feeding to increase in performance.
Reliable service in the hardest conditions
The long rake tines and reel with a special motion trajectory take kindly to twisted and laid crops. The large diameter of the auger prevents large grains wrap. The deep flights make unnecessary the supplementary tines.
Precise soil relief following
The system of longitudinal-transversal following of soil relief ensures the efficient use of the whole length of the header on irregular surfaces fields. All Power Stream headers are by standard equipped with the simple and reliable hydromechanical following device Level Glide, and optionally — with the electro-hydraulic system Auto Contour.
High-power
reverse
The hydraulic reverse of the header and feeding elevator tools, switched on from the cab will help you to clean quickly the header at jamming with grain or ingress of foreign matters.
At swath harvesting «Vector» is equipped with a swath pickup (width is 2,75 m or 3,4 m - for a double swath). As well as the header, this device is capable to follow the field relief in longitudinal
and cross-section directions, which guarantees high quality
of picking-up on rough fields. The reliable protection of the swath pickup elements from jamming, wrap and blowing the mass by wind ensures its operational stability even in adverse harvest conditions.
For tailings harvest,
two kitting-up variants are possible:
- chopper/swather. Unlike the universal chopper PKN-1500, it has a simpler and more reliable design, smaller weight, and is not adapted for the straw and chaff picking-up in carrier, as the modern agro-technologies are oriented to straw chopping and scattering on the field. Switching over to the swathing mode is made by one simple lever movement.
- stacker for cock forming (with prepressing) and automatic unloading on the run of cock of 12 m3.